-
ENG3002 – Computer Simulation and Modelling
Field: ENGINEERING MANUF AND QUALITY
Co-ordinator: Hamd Mohamed
Credit Value: 20
Level: 6
Timetable Slot: Semester 2
Pre-requisites: None
Co-requisites: None
Assessment: STDDA - Computer Simulation And Modelling (Degree Apprenticeship), Coursework: 40% STD - Computer Simulation And Modelling, Coursework: 40% STDFF - Computer Simulation And Modelling (4 Year Programme), Coursework: 40% Exam: 60% STDDA - Computer Simulation And Modelling (Degree Apprenticeship), Exam: 60% STD - Computer Simulation And Modelling, Exam: 60%
Designated for: Designated for: BSc Engineering; BSc Engineering (4 Year Programme); BSc Engineering Top-Up;
Description: Computer simulation modelling techniques offer savings in time and money in many company activities and are a valuable aid to management decision making. This module introduces students to computer modelling techniques and software and gives them the opportunity to practice the technique in the solution of problems.
-
ENG3005 – Lean Manufacturing and Quality Applications
Field: ENGINEERING MANUF AND QUALITY
Co-ordinator: Mahmoud
Credit Value: 20
Level: 6
Timetable Slot: Semester 2
Pre-requisites: None
Co-requisites: None
Assessment: STDFF - Lean Manufacturing And Quality Applications (4 Year Programme), Coursework: 40% STDBS - Lean Manufacturing And Quality Applications (Bsc), Coursework: 40% STDDA - Lean Manufacturing And Quality Applications (Degree Apprenticeship), Coursework: 40% STDBE - Lean Manufacturing And Quality Applications (Beng), Coursework: 40% 39GU - Lean Manufacturing And Quality Applications (Gulf University), Coursework: 40% Exam: 60% STDDA - Lean Manufacturing And Quality Applications (Degree Apprenticeship), Exam: 60% STDBE - Lean Manufacturing And Quality Applications (Beng), Exam: 60% STDFF - Lean Manufacturing And Quality Applications (4 Year Programme), Exam: 60% STDBS - Lean Manufacturing And Quality Applications (Bsc), Exam: 60%
Designated for: Designated for: Beng Electrical & Electronic Engineering; Beng Mechanical Engineering; Beng Mechanical Engineering (4 Year Programme); BSc Engineering; BSc Engineering (4 Year Programme); BSc Engineering Top-Up;
Description: This module has four key themes, which are vital in supporting technological industries. Focusing on the application of Quality Principles, Manufacturing improvement techniques, project management and personal performance and leadership. Many of the topics are discussed and evaluated using relevant industrial scenarios, applying knowledge gained to solve problems.
-
ENG3010 – Corrosion Analysis
Field: ENGINEERING MANUF AND QUALITY
Co-ordinator: Steve Mabbutt
Credit Value: 20
Level: 6
Timetable Slot:
Pre-requisites: None
Co-requisites: None
Assessment: 39UK - Corrosion Analysis (Distance Learning) (Skills Training Uk) September, Coursework: 100% DL01 - Corrosion Analysis (Distance Learning) January, Coursework: 100% 31UK - Corrosion Analysis (Distance Learning) (Skills Training Uk) January, Coursework: 100%
Designated for: Designated for: BSc Non-Destructive Testing (Top-Up);
Description: This module will enable students to develop comprehensive knowledge and the required skills for inspecting corroded materials non-destructively. It will provide the electrochemical, environmental and metallurgical aspects of corrosion principles and mechanisms and techniques for corrosion prevention and control. It provides information on procedural issues including data interpretation and analysis.
-
ENG3012 – Thermographic Imaging
Field: ENGINEERING MANUF AND QUALITY
Co-ordinator: Katherine Kirk
Credit Value: 20
Level: 6
Timetable Slot: Semester 2
Pre-requisites: None
Co-requisites: None
Assessment: 39UK - Thermographic Imaging (Distance Learning) (Skills Training Uk) September, Coursework: 100% DL01 - Thermographic Imaging (Distance Learning) January, Coursework: 100% 31UK - Thermographic Imaging (Distance Learning) (Skills Training Uk) January, Coursework: 100% JANDA - Thermographic Imaging (Degree Apprenticeship), Coursework: 40% Exam: 60%
Designated for: Designated for: BSc Non-Destructive Testing (Top-Up);
Description: This module will provide students with a thorough knowledge and understanding of thermal nondestructive testing (thermographic imaging).
-
ENG3014 – Vibration Monitoring and Analysis
Field: ENGINEERING MANUF AND QUALITY
Co-ordinator: Faris Elasha
Credit Value: 20
Level: 6
Timetable Slot: Semester 2
Pre-requisites: None
Co-requisites: None
Assessment: DL01 - Vibration Monitoring And Analysis (Distance Learning) January, Coursework: 100% JANDA - Vibration Monitoring And Analysis (Degree Apprenticeship), Coursework: 40% 31UK - Vibration Monitoring And Analysis (Distance Learning) (Skills Training Uk) January, Coursework: 100% 39UK - Vibration Monitoring And Analysis (Distance Learning) (Skills Training Uk) September, Coursework: 100% JANDA - Vibration Monitoring And Analysis (Degree Apprenticeship), Exam: 60%
Designated for: Designated for: BSc Non-Destructive Testing (Top-Up);
Description: At the end of this module, students will have a comprehensive knowledge and understanding of how vibration analysis can be used in condition monitoring.
-
ENG3017 – Advanced Inspection Methods and Techniques
Field: ENGINEERING MANUF AND QUALITY
Co-ordinator: Katherine
Credit Value: 20
Level: 6
Timetable Slot: All Year
Pre-requisites: None
Co-requisites: None
Assessment: 39UK - Advanced Inspection Methods And Techniques (Distance Learning) (Skills Training Uk) September, Coursework: 100% 31UK - Advanced Inspection Methods And Techniques (Distance Learning) (Skills Training Uk) January, Coursework: 100% DL01 - Advanced Inspection Methods And Techniques (Distance Learning) January, Coursework: 100% JANDA - Advanced Inspection Methods And Techniques (Degree Apprenticeship), Coursework: 40% Exam: 60%
Designated for: Designated for: BSc Non-Destructive Testing (Top-Up);
Description: This module will enable students to have a thorough knowledge and understanding of advanced nondestructive testing methods and techniques. These will include advanced ultrasonic methods, advanced radiographic methods and advanced eddy current techniques.
-
ENG3019 – Corrosion Engineering
Field: ENGINEERING MANUF AND QUALITY
Co-ordinator: Douglas Mills
Credit Value: 20
Level: 6
Timetable Slot: All Year
Pre-requisites: None
Co-requisites: None
Assessment: JANDA - Corrosion Engineering (Degree Apprenticeship), Coursework: 40% 39GU - Corrosion Engineering (Gulf University), Coursework: 40% Exam: 60% JANDA - Corrosion Engineering (Degree Apprenticeship), Exam: 60%
Designated for:
Description: This module will enable students to develop comprehensive knowledge and the required skills for inspecting corroded materials non-destructively. It will provide the electrochemical, environmental and metallurgical aspects of corrosion principles and mechanisms and techniques for corrosion prevention and control. It provides information on procedural issues including data interpretation and analysis.
-
ENG3020 – Advanced Electro-Mechanical System Design
Field: ENGINEERING MANUF AND QUALITY
Co-ordinator: Hamd Mohamed
Credit Value: 20
Level: 6
Timetable Slot: Semester 2
Pre-requisites: None
Co-requisites: None
Assessment: STDFF - Advanced Electro-Mechanical System Design (4 Year Programme), Coursework: 100% STDBS - Advanced Electro-Mechanical System Design (Bsc), Coursework: 100% STDBE - Advanced Electro-Mechanical System Design (Beng), Coursework: 100% STDDA - Advanced Electro-Mechanical System Design (Degree Apprentceship), Coursework: 100% 39GU - Advanced Electro-Mechanical System Design (Gulf University), Coursework: 100%
Designated for: Designated for: Beng Electrical & Electronic Engineering; BSc Engineering; BSc Engineering (4 Year Programme); BSc Engineering Top-Up;
Description: This module teaches the design of electromechanical systems which integrate mechanical, electrical, and control systems engineering. Laboratories form the core of the module. These cover topics such as transducers, signal conditioning, filters, closed loop control, digital logic, embedded systems and PLCs. Labs involve Arduino and PLC software such as Codesys.
-
ENG3021 – Machines and Mechanisms
Field: ENGINEERING MANUF AND QUALITY
Co-ordinator: Mohammad Ghaleeh
Credit Value: 20
Level: 6
Timetable Slot: Semester 1
Pre-requisites: None
Co-requisites: None
Assessment: STDDA - Machines And Mechanisms (Degree Apprenticeship), Coursework: 40% STDBS - Machines And Mechanisms (Bsc), Coursework: 40% STDFF - Machines And Mechanisms (4 Year Programme), Coursework: 40% STDBE - Machines And Mechanisms (Beng), Coursework: 40% 39GU - Machines And Mechanisms Gulf University), Coursework: 40% Exam: 60% STDFF - Machines And Mechanisms (4 Year Programme), Exam: 60% STDBE - Machines And Mechanisms (Beng), Exam: 60% STDBS - Machines And Mechanisms (Bsc), Exam: 60% STDDA - Machines And Mechanisms (Degree Apprenticeship), Exam: 60%
Designated for: Designated for: Beng Mechanical Engineering; Beng Mechanical Engineering (4 Year Programme); BSc Engineering; BSc Engineering (4 Year Programme); BSc Engineering Top-Up;
Description: This module provides students with instruction in the fundamentals of theory of machines. The theory of machines and mechanisms provides the foundation for the study of displacements, velocities, accelerations, and static and dynamic forces required for the proper design of mechanical linkages, cams, and geared systems.
-
ENG3022 – Advanced Digital Electronics
Field: ENGINEERING MANUF AND QUALITY
Co-ordinator: Hamd Mohamed
Credit Value: 20
Level: 6
Timetable Slot: Semester 1
Pre-requisites: ENG2051
Co-requisites: None
Assessment: STD - Advanced Digital Electronics, Coursework: 100% 39GU - Advanced Digital Electronics (Gulf University), Coursework: 100% STDFF - Advanced Digital Electronics (4 Year Programme), Coursework: 100%
Designated for: Designated for: Beng Electrical & Electronic Engineering;
Description: This module provides a modern introduction to logic design and the basic building blocks in digital systems. It covers combinational logic circuits and sequential circuits. State machines are illustrated through case studies of more complex systems. Signal processing techniques using programmable logic devices are introduced using Field Programmable Gate Arrays.
-
ENG3023 – Computational Fluid Mechanics
Field: ENGINEERING MANUF AND QUALITY
Co-ordinator: Nawar Al-Esawi
Credit Value: 20
Level: 6
Timetable Slot: Semester 1
Pre-requisites: ENG2055 and ENG2045
Co-requisites: None
Assessment: STD - Computational Fluid Mechanics, Coursework: 40% STDFF - Computational Fluid Mechanics (4 Year Programme), Coursework: 40% 39GU - Computational Fluid Mechanics, Coursework: 40% STD - Computational Fluid Mechanics, Exam: 60% 39GU - Computational Fluid Mechanics, Exam: 60% STDFF - Computational Fluid Mechanics (4 Year Programme), Exam: 60%
Designated for: Designated for: Beng Mechanical Engineering; Beng Mechanical Engineering (4 Year Programme);
Description: This module introduces concepts in finite difference and finite volume methods as applied to various ordinary and partial differential model equations in fluid mechanics; fundamentals of spatial discretization and numerical integration; numerical linear algebra. It further introduces engineering and scientific computing environment. Advanced modelling topics are also covered.
-
ENG3025 – Heat Transfer
Field: ENGINEERING MANUF AND QUALITY
Co-ordinator: Nawar Al-Esawi
Credit Value: 20
Level: 6
Timetable Slot: Semester 2
Pre-requisites: ENG2055 or ENG2047
Co-requisites: None
Assessment: STD - Heat Transfer, Coursework: 40% STDFF - Heat Transfer (4 Year Programme), Coursework: 40% Exam: 60% STD - Heat Transfer, Exam: 60%
Designated for: Designated for: Beng Mechanical Engineering; Beng Mechanical Engineering (4 Year Programme);
Description: The aim of this module is to build and develop the fundamentals thermodynamics and Fluid mechanics covered at level 4 and advanced thermofluids covered at level 5. Students apply reasonable assumptions and boundary conditions to simplify the differential equations governing the heat transfer and thermodynamics in order to have analytical solution to heat transfer and thermodynamics problems. The concept and use of computational thermofluid mechanics as a numerical technique to solve more complex heat transfer and thermodynamics problems is introduced.
-
ENG3200 – Mechanisms of Machines
Field: ENGINEERING MANUF AND QUALITY
Co-ordinator:
Credit Value: 20
Level: 6
Timetable Slot:
Pre-requisites: None
Co-requisites: None
Assessment: 39BF - Mechanisms Of Machines (Bedford College), Coursework: 50% Exam: 50%
Designated for:
Description: This module provides students an introduction into the theory of machines. This provides the foundation for the study of displacements, velocities, accelerations, and static and dynamic forces required for the proper design of mechanical linkages, cams, and geared systems.
-
ENG3201 – Computer Simulation and Modelling
Field: ENGINEERING MANUF AND QUALITY
Co-ordinator:
Credit Value: 20
Level: 6
Timetable Slot:
Pre-requisites: None
Co-requisites: None
Assessment: 39BF - Computer Simulation And Modelling (Bedford College), Coursework: 100%
Designated for:
Description: Computer simulation modelling techniques offer savings in time and money in many company activities and are a valuable aid to design engineering systems efficiently. This module introduces students to computer modelling techniques and software including: MATLAB, Simulink and Simscape. Students will have the opportunity to practice the technique in formulating an engineering problem accurately and determine their solution analytically and numerically.
-
ENG3202 – Mechatronics Design
Field: ENGINEERING MANUF AND QUALITY
Co-ordinator:
Credit Value: 20
Level: 6
Timetable Slot:
Pre-requisites: None
Co-requisites: None
Assessment: 39BF - Mechatronics Design (Bedford College), Coursework: 40% Exam: 60%
Designated for:
Description: This module teaches the design of mechatronics systems ? electromechanical control systems, which integrate, sensors, actuators with automated control. Laboratories combine micro-controller and PLC-based control with sensors, actuators and signal conditioning, so that individual topics are studied within the overall mechatronics framework
-
ENG3203 – Analogue and Digital Communication Systems
Field: ENGINEERING MANUF AND QUALITY
Co-ordinator:
Credit Value: 20
Level: 6
Timetable Slot:
Pre-requisites: None
Co-requisites: None
Assessment: 39BF - Analogue And Digital Communication Systems (Bedford College), Coursework: 40% Exam: 60%
Designated for:
Description: The purpose of this module is to give students a thorough grounding in the design and operation of wireless communication systems. It covers electromagnetic wave propagation and wireless fundamentals, amplitude and frequency-based modulation schemes, the design of the major equipment used in wireless communications ? transmitters, receivers and antennae .
-
ENG3204 – Computational Fluid Dynamics
Field: ENGINEERING MANUF AND QUALITY
Co-ordinator:
Credit Value: 20
Level: 6
Timetable Slot:
Pre-requisites: None
Co-requisites: None
Assessment: 39BF - Computational Fluid Dynamics (Bedford College), Coursework: 40% Exam: 60%
Designated for:
Description: This module introduces concepts in finite difference and finite volume methods as applied to various ordinary and partial differential model equations in fluid mechanics; fundamentals of spatial discretization and numerical integration; numerical linear algebra. It further introduces engineering and scientific computing environment. Advanced modelling topics are also covered.
-
ENG3205 – Mechanics of Solids
Field: ENGINEERING MANUF AND QUALITY
Co-ordinator:
Credit Value: 20
Level: 6
Timetable Slot:
Pre-requisites: None
Co-requisites: None
Assessment: 39BF - Mechanics Of Solids (Bedford College), Coursework: 50% Exam: 50%
Designated for:
Description: The aim of this unit is to develop further knowledge on elastic and plastic analysis and design of more complex structures. On the successful completion of this module the student should have sufficient knowledge and skills to analyse and design simple structures in an engineering designs office.
-
ENG3206 – Digital Signal Processing
Field: ENGINEERING MANUF AND QUALITY
Co-ordinator:
Credit Value: 20
Level: 6
Timetable Slot:
Pre-requisites: BTEC Level 3 or equivalent in Electrical/Electronic Engineering
Co-requisites: None
Assessment: 39BF - Digital Signal Processing (Bedford College), Coursework: 40% Exam: 60%
Designated for:
Description: The purpose of this module is to give students a thorough grounding in the major features of Digital Signal Processing . Working from a foundation of Analogue Signal Processing and Analogue Filter Design, students are introduced to the different mathematical methods used to model and analyse digital systems (Time, Frequency, Z-domain), before applying these methods to design the two major categories of Digital Filters ? Non-recursive and Recursive digital filters. Students will gain detailed experience in filter design, both through algebraic techniques and computer simulation / modelling
-
ENG4004 – Engineering Project
Field: ENGINEERING MANUF AND QUALITY
Co-ordinator: Tariq Chaudhary
Credit Value: 40
Level: 6
Timetable Slot: All Year
Pre-requisites: None
Co-requisites: None
Assessment: 39GU - Engineering Project (Gulf University), Coursework: 100% STDFF - Engineering Project (4 Year Programme), Coursework: 100% STDBE - Engineering Project (Beng), Coursework: 100% STDDA - Engineering Project (Degree Apprenticeship), Coursework: 100% STDBS - Engineering Project (Bsc), Coursework: 100%
Designated for: Designated for: Beng Electrical & Electronic Engineering; Beng Mechanical Engineering; Beng Mechanical Engineering (4 Year Programme); BSc Engineering; BSc Engineering (4 Year Programme); BSc Engineering Top-Up;
Description: This module provides the opportunity to apply and develop theoretical knowledge in an individual project and individual report. By completing the module students will gain experience of researching the necessary technical information, of solving cross-disciplinary technical problems. This module could form the assessment for any University approved industrial placement opportunity.
-
ENG4005 – Technology Project
Field: ENGINEERING MANUF AND QUALITY
Co-ordinator: Abdeldjalil Bennecer
Credit Value: 40
Level: 6
Timetable Slot: All Year
Pre-requisites: None
Co-requisites: None
Assessment: JANDA - Technology Project (Degree Apprenticeship), Coursework: 100% 31UK - Technology Project (Distance Learning) (Skills Training Uk) January, Coursework: 100% DL01 - Technology Project (Distance Learning) January, Coursework: 100% STD - Technology Project, Coursework: 100% 39UK - Technology Project (Distance Learning) (Skills Training Uk) September, Coursework: 100%
Designated for: Designated for: BSc Engineering; BSc Engineering Top-Up; BSc Non-Destructive Testing (Top-Up);
Description: This module provides the opportunity for students to undertake the research and self-management of a project. Students will gain experience of managing the development of a substantial piece of work, to develop their research methods and to demonstrate a professional approach to work.
-
ENG4200 – General Degree Project
Field: ENGINEERING MANUF AND QUALITY
Co-ordinator:
Credit Value: 40
Level: 6
Timetable Slot:
Pre-requisites: None
Co-requisites: None
Assessment: 39BF - General Degree Project (Bedford College), Coursework: 100%
Designated for:
Description: This module will enable the learners to apply the theoretical and practical skills gained throughout the mechanical program of study.The module will consist of an individual project and an accompanying report. It provides an opportunity for learners to use and develop research skills in engineering to solve cross disciplinary technical problems. There is opportunity for learners in employment to undertake this as a work based project and therefore directly applying to industry. Learners not in employment will be encouraged to take work placement opportunities or complete this module purely in house with an element of research into the engineering industry.
-
ENG4201 – Mechanical Degree Project
Field: ENGINEERING MANUF AND QUALITY
Co-ordinator:
Credit Value: 40
Level: 6
Timetable Slot:
Pre-requisites: None
Co-requisites: None
Assessment: 39BF - Mechanical Degree Project (Bedford College), Coursework: 100%
Designated for:
Description: This module will enable the learners to apply the theoretical and practical skills gained throughout the mechanical engineering programme of study.The module will consist of an individual project and an accompanying report. It provides an opportunity for learners to use and develop research skills in mechanical engineering to solve cross disciplinary technical problems. There is opportunity for learners in employment to undertake this as a work based project and therefore directly applying to industry. Learners not in employment will be encourage to take work placement opportunities or complete this module purely in house with an element of research into the engineering industry.
-
ENG4202 – Electrical Degree Project
Field: ENGINEERING MANUF AND QUALITY
Co-ordinator:
Credit Value: 40
Level: 6
Timetable Slot:
Pre-requisites: None
Co-requisites: None
Assessment: 39BF - Electrical Degree Project (Bedford College), Coursework: 100%
Designated for:
Description: This module will enable the learners to apply the theoretical and practical skills gained throughout the electrical/electronic program of study.The module will consist of an individual project and an accompanying report. It provides an opportunity for learners to use and develop research skills in electrical/electronic engineering to solve cross disciplinary technical problems. There is opportunity for learners in employment to undertake this as a work based project and therefore directly applying to industry. Learners not in employment will be encourage to take work placement opportunities or complete this module purely in house with an element of research into the engineering industry.